Production of a regenerative unit for the incinerator of waste vapours of volatile organic compounds

In 2021, I&C Energo successfully completed a major engineering contract in the field of air protection for HK ENGINEERING s.r.o. Specifically, this was the production of a regenerative unit for a VOC waste vapour incinerator.

This was a three-chamber unit with a maximum flow rate of 23 000 Nm3/h and a total weight of more than 18 tonnes. The dimensions of the unit: 8m wide × 3m deep × 8.5m high. The unit was completely sandblasted, coated with a special two-component coating and fitted with a 300 mm thick Sibral thermal liner.

The produced unit was successfully installed in the VOC waste vapour incinerator at GRANITOL in Moravské Beroun and operates in unattended mode in accordance with the requirements of stem production, guaranteeing the removal of pollutants within the limits required by the relevant legislation.

This was a pilot project and the experience gained will be used in other similar implementations of industrial air cleaning and organic solvent recovery units. The entire production was carried out in I&C Energo’s workshops on the premises of the Mělník Power Plant.